Sunlite Rear Pro Stand Kickstand | 18 mm Direct Mount, 24–29″
The Sunlite Rear Pro Stand is an adjustable alloy kickstand for bicycles with an 18 mm rear direct-mount fitting and 24–29-inch wheels. A thumb lever lets you change the leg length quickly, helping you set a practical parking angle and adjust for uneven ground.
Check the mounting point first
This version bolts to the frame's rear kickstand mount on the chainstay. The 18 mm measurement refers to the spacing between the mounting holes, measured center to center. It is not the leg length. Your frame needs the matching mount; wheel size alone does not confirm compatibility.
Specifications
- Mount: 18 mm rear direct mount
- Wheel size range: 24–29 inches
- Length: adjustable using a thumb lever
- Material: alloy
- Color: black
- Listed weight limit: 75 lb
- Sold individually
Choosing and using your kickstand
Adjust the leg so the parked bike has a stable lean, then check that the stand clears moving parts when folded. The listed 75 lb limit is a kickstand support limit, not a rider weight rating. Confirm suitability for the weight of your parked bicycle and its load.
Common questions
Will this fit a 40 mm mount? This listing is specifically the 18 mm version. Measure the mounting holes before ordering.
Does it clamp around a frame tube? No. It requires a compatible rear direct-mount fitting.
Can it fit different wheel sizes? The adjustable leg is listed for 24–29-inch wheels, provided the frame mount and clearance are suitable.
Send Go Grava a photo of your kickstand mounting point and its hole spacing if you need a fit check.