The Mayebikes LDSD-236 is a right-hand, full-twist throttle with an integrated key switch for compatible 36V electric bicycle systems. Rotating the grip sends a throttle command to the controller, letting you adjust motor output from the handlebar. The ABS assembly has a 54-inch cable for routing toward your system's connection point.
Check compatibility before ordering
A matching voltage or a plug that looks similar does not establish compatibility. Compare this throttle with your existing part and your controller's specifications before purchase.
-
Connections: Supplier photos show a separate three-wire accelerator connector and two-wire switch connector. Check connector shape, keying, pin count and pin assignments against your system. Wire colors alone do not confirm a match.
-
Electrical fit: Confirm that your controller accepts this throttle's signal and key-switch arrangement. The 36V rating describes the supplier's intended system; it does not specify the throttle signal voltage.
-
Cable reach: Measure the actual routing distance from the handlebar to the connection, allowing slack for steering and strain relief. Total cable length is 54 inches (approximately 137 cm); verify that it is sufficient before buying.
-
Handlebar fit: The supplier diagram labels the mounting bore as 22 mm and the assembly length as 135 mm. Check your handlebar diameter and available space alongside the brake lever and other controls.
Specifications
- Brand / model: Mayebikes LDSD-236
- Throttle: right-hand full twist with key switch
- Supplier-listed system voltage: 36V
- Cable length: 54 inches / approximately 137 cm
- Material: ABS
- Supplier-listed product weight: 140 g
- Country of origin: China
Mechanic's fit advice
This is a replacement control for a matching electrical system, rather than a guaranteed fit for every 36V e-bike. If you cannot verify the connectors, pin assignments or controller requirements, have a qualified e-bike technician identify the correct part before connecting it. After installation, check free grip return, cable clearance through the full steering range and correct throttle operation before riding.
Will the cable reach my controller?
The cable measures 54 inches in total. Follow the intended cable route with a tape measure rather than measuring a straight line, and leave enough slack for the handlebars to turn without pulling on the connectors.
