Burgh Endurance Bar Tape — Gloss Black (3.5mm)
Burgh Endurance Bar Tape — Gloss Black (3.5mm)
Burgh Endurance Bar Tape — Gloss Black (3.5mm)
Burgh Endurance Bar Tape — Gloss Black (3.5mm)
Burgh Endurance Bar Tape — Gloss Black (3.5mm)
Burgh Endurance Bar Tape — Gloss Black (3.5mm)
Burgh Endurance Bar Tape — Gloss Black (3.5mm)
Burgh Endurance Bar Tape — Gloss Black (3.5mm)

Burgh Endurance Bar Tape — Gloss Black (3.5mm)

$53.99
/
Shipping calculated at checkout.
Burgh Endurance Bar Tape — Gloss Black (3.5mm)

The Burgh Endurance Bar Tape is a thick, shock-absorbing road and gravel tape designed for riders who want comfort, grip, and durability over long miles. At 3.5mm thick, this tape is built to reduce hand fatigue on rough pavement, gravel, and mixed surfaces while still maintaining a secure feel at the bars.

This Gloss Black version is a straightforward, all-conditions choice for endurance road riders, gravel riders, and anyone looking to soften front-end vibration without going to bulky gel pads.

Key Functional Details

  • 3.5mm thickness for increased vibration damping and comfort
  • High-grip surface designed for dry and wet riding
  • 250cm length per roll for full drop-bar coverage
  • Durable construction intended for long service life
  • Gloss Black finish
  • Total weight: approximately 90g per set
  • Includes bar-end plugs and finishing tape

Compatibility & Technical Notes

  • Designed for standard drop handlebars
  • Suitable for road, gravel, and endurance setups
  • Compatible with electronic and mechanical shift housings
  • Thicker profile may slightly reduce bar diameter clearance for some aero levers
  • Not intended for flat bars or MTB grips

Service / Ownership Context

Thicker bar tape like this works best when wrapped with consistent tension to avoid bunching at the bends. Riders should expect normal wear at high-contact points near the hoods. Replacement interval depends heavily on riding frequency and glove use.

Fit & Use Signals

  • Good fit for endurance road and gravel riders
  • Good fit if you want extra vibration damping without adding gel pads
  • Good fit for riders doing longer rides or rougher pavement
  • Not a fit if you prefer ultra-thin race tape
  • Not a fit for flat-bar bikes
This is one of the tapes we point riders toward when they complain about hand numbness or rough-road fatigue. At 3.5mm it’s noticeably thicker than most stock tape. You feel it immediately on chipseal and gravel. It’s popular with endurance riders and gravel customers who don’t want to run gel pads under thinner tape. Common customer expectations: Softer feel at the bars Less buzzing through the hands Better grip in wet conditions Real shop notes: Wrap tension matters. Too loose and it can bunch at the curves. Because it’s thick, some aero hoods get tight during install. It holds up well but will show wear near the hood tops first. We usually recommend this tape for: Long road rides Gravel bikes Riders with hand numbness Customers upgrading from thin OEM tape Not ideal for: Weight-focused race builds Riders who like a very direct bar feel Durability is solid compared to cheaper foam tapes. Riders usually get a full season or more unless they ride glove-free constantly. If someone wants even more damping, we sometimes combine this with light gel pads underneath. Installation tip: stretch lightly while wrapping, especially through the drops, and finish tight near the levers to avoid future creep. This tape is about comfort and control—not aesthetics or grams.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like

Recently viewed