This is a new old-stock 2018 Fuji Gran Fondo 1.1 carbon endurance road frameset. It includes the carbon frame, carbon fork, integrated headset bearings, derailleur hanger, seatpost clamp, and front derailleur braze-on mount.
This is a flat mount disc, thru-axle road platform built around a PF30 bottom bracket shell. No thru-axles included. No bottom bracket included. Frame and fork only.
Key Functional Details
- Size availability: 52cm and 54cm
- C10 high-modulus carbon frame with VRTech
- Carbon fork with tapered steerer
- Rear spacing: 12x142mm thru-axle (axle not included)
- Front spacing: 12x100mm thru-axle (axle not included)
- Brake mount: Flat mount disc only
- Bottom bracket standard: PF30 (PressFit 30)
- Integrated headset: 1 1/8" upper – 1 1/2" lower (bearings included)
- Seatpost diameter required: 27.2mm
- Front derailleur mount: Braze-on
- Internal cable routing
- Hidden fender eyelets
- Platform Type: Road (Endurance Disc)
Compatibility & Technical Notes
- Requires 12x100mm front thru-axle wheel
- Requires 12x142mm rear thru-axle wheel
- Thru-axles NOT included — must match your hub’s thread pitch
- Flat mount disc brake compatible only
- Does NOT support rim brakes
- Bottom bracket shell: PF30
- Requires PF30-compatible crank or conversion bottom bracket
- Front derailleur: Braze-on only
- Seatpost required: 27.2mm
- Designed for 700c wheels
- Platform Type: Road
Service / Ownership Context
PF30 requires proper press-fit installation tools. Flat mount brake alignment and rotor spacing must be set correctly during build. Thru-axles are not included and must match the thread pitch of your hub. This is a custom build platform intended for experienced builders or shop assembly.
Fit & Use Signals
-
Good Fit: You are building a modern endurance road bike with disc brakes.
-
Good Fit: You have or plan to purchase 12x100 / 12x142 disc wheels.
-
Good Fit: You understand PF30 bottom bracket systems.
-
Not A Fit: You have rim brake wheels.
-
Not A Fit: You require quick-release hubs.
-
Not A Fit: You are unsure how to select a bottom bracket for PF30.
Original Geometry & Stock Build Reference (Available Sizes)
| Size |
Seat Tube
(mm) |
Top Tube
(mm) |
Head Tube
(mm) |
Stack
(mm) |
Reach
(mm) |
Standover
(mm) |
Orig. Stem |
Orig. Crank |
Orig. Bar
Width |
| 52cm |
480 |
530 |
150 |
557 |
368 |
764 |
90mm |
170mm |
400mm |
| 54cm |
500 |
545 |
170 |
582 |
373 |
788 |
100mm |
172.5mm |
420mm |
This is essentially the higher-spec evolution of the 2017 disc model. Same PF30 shell, same 12x142 spacing. Common mistake: buyers assume thru-axles are included. They are not. Must match hub thread pitch. PF30 creak complaints almost always come from improper install or cheap BB. Use a quality unit and correct press. 27.2 seatpost again — same as the disc Elite model. Don’t mix up with the rim brake 31.6 version. Flat mount only. Some customers still confuse post mount. Great platform for 11-speed mechanical, 11-speed Di2, or modern 12-speed builds with proper BB setup. Ideal buyer: experienced builder who wants a high-end endurance carbon chassis at clearance pricing. Not for someone trying to reuse QR wheels.
